Skip to main content
[vc_row][vc_column width=»1/2″][vc_column_text]

SILHOUETTE PRO

[/vc_column_text][/vc_column][vc_column width=»1/2″][vc_column_text]

Precio P.V.P.: 2.990€ / Unidad (IVA incluido)

[/vc_column_text][/vc_column][/vc_row][vc_row][vc_column width=»1/4″][vc_single_image image=»723″ img_size=»500×1000″][/vc_column][vc_column width=»3/4″][vc_column_text]

The elegantly styled Silhouette Pro, from Legacy Audio, provides no compromise performance in an artful 4.5″ deep on-wall/in-wall design. The robust driver complement and special electrical network yield the optimum response at the listening position. The result is a speaker that does not sound like an on-wall with staging beyond the wall.

French cleat-mounting brackets make for quick installtion on the wall surface.

On-wall speakers are often dynamically challenged, especially in the lower octaves. This isn’t the case with the Legacy Silhouette Pro. It provides top-to-bottom performance with plenty of slam.

Design: The three-way design features a newly engineered 10″ low-profile long-excursion woofer and pneumatically coupled radiator to lay the foundation supporting the high acceleration 7″ silver/graphite midrange. Treble remains clear and airy from the 4″ Legacy AMT ribbon, boasting a high-temperature pleated Kapton diaphragm and neodymium motor.

Crossover: The internal crossover divides the spectrum precisely where the wall boundary creates a strong dip in the response of conventional speakers. This compensation in the electrical network allows for the appropriate response at the listening position. The result is a speaker that does not sound like an on-wall with staging beyond the wall.

Legacy Audio Silhouette Pro may be ordered with an oversized outer baffle for in-wall installations.

[/vc_column_text][/vc_column][/vc_row][vc_row][vc_column width=»2/3″][vc_column_text]
Application: On wall full range for mains or side channels
System Type: Three way, passive radiator
Mounting: Wall mount with bracket
System Directivity: 60 degrees horizontally, 45 degrees vertically
Tweeter: 4″ AMT
Midwoofer: 7″ Silver/Graphite
Bass: 10″ long throw low-profile motor
Low Frequency Alignment: 10″ passive radiator
Freq. Response (Hz, +/-3dB): 42-28k
Sensitivity (Room, dB@ 2.83V): 92
Crossover Freq. (Hz): 250, 2.5k
Inputs: 1 pair binding post, recessed cup
Dimensions (inches) HxWxD: 35.5 x 13.125 x 4.6 (add 5/8” to depth if grille is required)
Weight: 50 lbs
In Wall Dimensions (inches) HxWxD: Cabinet body: 35.5 x 13.125 x 3.75 Outer baffle: 37 x 18.5 x .75
In Wall Grille Dimensions (inches) HxWxD: 37 x 18.5 x .75
In Wall Weight: 55 lbs
[/vc_column_text][/vc_column][/vc_row][vc_row][vc_column][vc_gallery type=»image_grid» images=»258,259,260,261,262,263,264,265,266,267,268″ img_size=»115×115″ onclick=»img_link_large»][/vc_column][/vc_row]